Tag: sleeve island

knitting

Minerva 2: Escape from sleeve island

LindeyLeave a comment

So here’s where we left off:

And so far, the cardigan had taken me four days: two for the main body, and two for these little sleeve nubbins. The remainder of the sleeves took me another day and a half of steady knitting, and then I connected them to the body.

If you haven’t knit a bottom-up sweater, be forewarned, the five or ten rows after you connect sleeves to a body are a pain in the butt. You have to keep the sleeves very bunched up and all on the needles at once, because you’re essentially asking what was flat to become round. Technically, the sleeves being knit in the round, this isn’t actually what you’re doing, but the spots where body meets sleeve are very stubborn and don’t like their new place in life, so they take it out on you for a while.

Here we are, some measure into the rest. With three balls wound, I used one to do the body, and one for each sleeve. Then when I connected the body, I went back to the one I’d been using there. It ran out right about the time of this picture, so I attached one of the sleeve balls and continued on. That second ball was enough to finish the sweater, so I used a total of 2.5 balls, meaning the whole sweater cost under $50, including enough extra yarn to make a pair of short socks or a hat or something.

I’ll note here that the sweater was written by someone whose first language isn’t English, so there was one point in the pattern I was concerned people might be confused by: Once she says to start the raglan increases, you continue them for the rest of the sweater until you get to the neck. When she goes to the explanation of how to increase for the sleeve puffs, you continue the raglan decreases as you have been every other row, even though the pattern is a little vague about that part.

The sleeve puffs? Are fabulous. Honestly, they make me want to knit another one, because I just love the construction of them, I’ll definitely be knitting more patterns by the designer, because this one is lovely and elegant in its finished version.

Oh, you actually wanted to see the whole sweater?

I guess. Well, fair warning, I haven’t sewn the buttons on yet, because like every knitter, finishing eludes me sometimes. I did the knitting, why is there more work? But yeah, here’s Minerva:

It’s a little tight, but that’s probably back to my slightly-small gauge rather than the pattern. It’s also not too tight, I’m mostly worried about the buttons pulling a little when I finish and put it on. Maybe in another five pounds or so.

All together, Minerva took me about six or seven days of knitting, and a lot of them were just the sleeves. Those sleeves’ll get you every time. But don’t get trapped on sleeve island. The sweater’s worth finishing. It totaled about 1200 yards of yarn for my size 2x behind, so it’s a tiny amount of yarn, for a full sleeve sweater.

knitting

Knitting the Minerva Cardigan

LindeyLeave a comment

So last week, I finished a sweater. This week, I’m going to talk about it. Here’s the pattern’s sample picture, for reference:

It’s the Minerva Cardigan, by Fabel Knitwear, and while it was initially inspired by the well known series about a boy wizard, the pattern writer has also said they stand with the trans community against the author’s sadly well-known vitriol against trans people. I appreciated the statement, so decided to go with the sweater in spite of the name.

First course of action, then, was to choose the yarn. Something about the look of the sweater screams red to me, so while I didn’t have a rich burgundy like the sample in the pattern pictures, I did have a tonal cherry red, which seemed perfect to me. It was even a Knit Picks yarn, one of their Stroll tonal line, in a color called Heartfelt. It’s even still available for $14.99 a hank, if you want to make a sweater with it, and it’s kind of a steal, like most KP yarn. In case you’re not aware of them, Knit Picks is generally a good step between big box store acrylics and super expensive wools, so if you’re in that stage where you want to try something better than Red Heart but you’re not sure about spending that much money, they’re a pretty good bet.

Warning: This yarn comes in hanks. It’s not prewound into balls. This means to use it, you’ll either need help from a friend with tools or local yarn store, or you’ll need to own tools for winding yarn. This can be as simple as a chair and a nostepinne, if you’re willing to spend hours winding yarn, or as complex and expensive as a swift and ball winder, if you want it done fast and are willing and able to spend more. Having been doing this for many years, and in large amounts, I have the tools in question, and can talk further about them if anyone wants to hear it.

I had four hanks, so that was certainly enough to make any size I needed. Measurements said I should have made the XL, which would have been the first time I made an XL instead of a 2X in many years, but ironically, my gauge swatch said I was a little off, so I sized up to make sure it would fit.

Finally, with three of my four hanks wound into balls, I was ready to get started. The pattern starts with the body, which took the better part of one hank, and then when you’re ready to attach the sleeves, well . . . you have to make the sleeves. Which I must say, for this sweater, was painful. They’re full length sleeves, which I rarely knit since I run hot, and they seemed to go on forever. This is a thing knitters call “sleeve island,” which I think has something to do with the feeling of being trapped and unable to escape that knitting sleeves gives one. Fortunately, I suspected I was going to end up there, so I knit them both at the same time, magic loop, so I wouldn’t have to do one, then the other, which might have led to a single finished sleeve and abandoned project.

Sleeves at about 5″, after the first two days of work on them.

Since this is already running ridiculously long, I’ll come back Friday with more on Minerva. Till then, happy knitting!